Questions & Answers for: Oldsmobile Cutlass Supreme distributor gets loose

...distributor in the engine, (the one the coil pack hooks up to) I thought I knew my stuff until a 15 year old neighbor kid came and fixed my sundance that way, that or its a loose battery wire. hope ...

spark occurs, check for the presence of normal battery voltage at the battery terminal (BAT) in the distributor cap. The ignition switch must be in the on position for this test. Either a voltmeter or

...distributor/coil system look for any loose/corroded wiring. Welcome to FixYa.com Have you a multimeter if so check the meter black lead to the battery and the red lead to the starter positive do you ...

changed distributor cap now car will not crank You should check to make sure that the rotor button is in place. Also check the coil wire and the fire orderr to make sure that no wires are crossed. ...

...timing checked out to ensure accuracy. The timing must be right to get fire to the plugs. Check the distributor and rotor. Check to make sure the rotor turns as the engine is cranked. If not, check ...

...plugs and new spark plug wires My Acura does that, the problem was loose wires. Check inside the distributor for loose wires. That will cause a problem in wide temperature changes. Hope this

distributor firing order for 1969 olds 350 1969 Oldsmobile Cutlass 5.7L 4BL OHV 8cyl The Firing Order .Firing order 1-8-4-3-6-5-7-2 ---------front ' 2 4 6 8 ' of ' ' distributor rotates counter ...

how do i set the distributor that runs counter clockwise No different than setting one that turns clockwise. You set it in so the rotor on the distributor shaft lines up with the number 1 cylinder ...

how to set distributor its for a v8 that runs counter clockwise Here's a link on your distributor Chanz. Repair Guides Engine Electrical Distributor AutoZone com

...distributor plug loose and pull it up and check to see if the o`ring is in one piece. if so run some automotive silicone around the seal and add a distributor paper gasket to it and drop it back in ...