Questions & Answers for: dirty channel problem

channel at the bottom. I first I thought it was my glasses. This Tv is less than 5 years old, has been working great up to this point. Is it time for a new set or can this problem be corrected? Thanks

...channel amp that I used 2 channels for the mids and highs and 2 channels for the bass. Sounds like you have a bad or dirty gain potentiometer. Try turning the gain up and down with the volume at a ...

...channel 15?? can you help? your remote maybe dirty inside where the semi conductors are that designate what numbers you are ppushing. you can take it apart and clean it under the rubber. if that dont ...

...I manage to trace the signal to main amp but no output Check your input or output cables might be dirty I had the same problemand 1 of my output wire was dirty so i sprayed tha electric cleaner and ...

...button from channel for dirty , open or defective.2) test the TUNER, lubricate tuner contacts. 3) see tuner, i-f, video detector, AGC , rfamp/converter ,amps, circuit see the block diagramGod bless ...

...channel output, when the music or tone is on an input, switch it between the 2 outputs.  It may just be dirty swith contacts, fader contacts, dirty or damaged interupt contacts on the jacks, or ...

...is stuck and won't close what do I do? Stuck windows can be caused by: 1.Window rubber channels dirty or broken. Try pushing the window down or up while pushing the window riser switch. If it ...

Model mg100hdfx head. Clean channel isn't working but the other channel works fine. What's wrong? I would suspect a faulty or dirty channel select switch.

...is messed up therefore not let me catch Channel 19 I think you should take this into a tech. It sounds like your channel switch is either defective or dirty. You may also be missing other

...channel hose, recovery hose (located behind the recovery water tank), deteriorating rubber seals, dirty/clogged filter, dirty louver cover (exhaust for the vacuum above the tank). FLOORMATE Floor ...