Questions & Answers for: digital thermometer reads Ovens

...digital thermometer with a remote temperature probe, hanging from the center of the oven, which shows the temp in tenths of a degree. I let the oven cycle on and off at least three times, then take ...

Digital oven temperate is wrong My Kenmore electric oven is now reading up to fifty degrees too hot (shows 400 but is only 350 inside). Is this maybe just an oven probe issue or is there a thermostat ...

reads 0, it is at original factory setting. you can now adjust by pressing the up button for a hotter oven, down for lower. it can only be done for 35 degrees. when done, hit clear/off. this will help

...thermometer(the one you stick in the oven is not reliable). Electric ovens should keep a near constant tempature so if you have it set to 350 the oven should stay around 350 once temp is reached. Now ...

digital display. The method varies depending on the model range. This calibration method is used to adjust the thermostat if it is not keeping proper tempature. For example if you are setting the oven

...thats taking a half hour to read correctly. The oven is probably getting there sooner. If you had a digital thermometer, the read would come quicker. So save your money,nothing wrong with your

...digital oven with a thermometer: The 100 degree reading is probably the lowest reading the thermometer will register. Don't give me a poor rating because I said your question was poor. Include as ...

...digital display can say 350 degrees and the oven thermatore that is located in the oven reads 310. Does this oven need to be calibrated? The oven is 6 years old. The thermometer that hang on rack are ...

digital thermometer used specifically for testing ovens, you might just be leading leading yourself astray. You need a calibrated thermometer. If I don't have a calibrated digital thermometer on me, I

I have an Observer Thermostat that's about 1 yr old. It's reading 5 degrees higher than 2 different digital thermometers. Is there a way to calibrate these things? There is no way to calibrate the ...