Question about 5.8GHz Analog Cordless Phone
...it out): Press PROG.• Press ? or ? until the screen displays DIAL MODE: and the current setting. Press SELECT. The current setting blinks. Press ? or ? to select TONE or PULSE. Press SELECT to
...the number dials and then it goes right to the dial tone. It doesn't ring the number, just goes to dial tone. it's not sending a signal to the phone service check your phone lines for proper ...
...dial tone connected vtech CS6229-3 but get no dial tone - waited till batteries were fully charged, still no dial tone - reconnected the old phone & now no dial tone there either (worked fine ...
no dial tone i havt this vtech 5.8 phone and no dial tone vtech are not very good u mite need another fone
Question about DECT 6.0 Cordless Phone with Digital Answering System
dial tone comes on, and I have to enter the numbers again. How do I fix this? It is a Vtech 6.0 DECT. Usually there are two modes provided to all fixed line telephones. Tone mode and pulse mode. Pulse
Question about 5.8GHz Analog Cordless Phone
dial tone to touch tone when I dial a number my dial is rotary dial so I want the dial back to touch tone when i dial a number Since you declined to specify the model of your VTech 5.8GHz phone, I can
Question about 5.8GHz Cordless Phone with Digital Answering System
...dial tone My corded phone has a dial tone but not my Vtech cs5121 cordless phone. Why? Vtech phones are junk! I have had many trouble calls for no dial tone,only to find out the Vtech phone is the ...
Question about 5.8GHz Cordless Phone with Digital Answering System
...vtech phone to tone Enter the model of your VTech phone into the search box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual. The manual will explain how to ...
Question about 5.8GHz Cordless Phone with Digital Answering System
I dial out on my Vtech phone, it goes back to a dial tone or a busy signal Are you sure that the phone is even trying to dial? Push 1 digit and make sure dial tone is going away. Could be bad dial pad
Question about 5.8GHz Cordless Phone with Digital Answering System
current settings• Press SELECT. The current setting blinks • Press or to select TONE or PULSE. • Press SELECT to save Hope it helps, sounds like the phone should ALREADY be on tone dial out of the box
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions