Questions & Answers for: dead axle

...engine went dead. Sounds like the axle slipped out of the differential. There is usually a snap ring on the axle which holds it in place. This could have broken, came loose, etc, Major surgery

...of it with a dead blow hammer to make sure it seats, then put the axle through strut fork and into the hub reinstall all bolts and tighten. hope this helps good luck. this should only take about 45 ...

...park breaks and pry it out. The reluctor ring is rubber and it holds onto the axle good. You will not hurn anything by doing this. And when you put it back in just wack it in with a dead bow hammer

dead lever and no movement from the pressure plate when I moved the clutch arm. 2001 yamaha r6 http://www.cmsnl.com/yamaha-yzf-r6mmc-2000_model10891/partslist/ The clutch cable actuates an axle with a

...dead stop. Sounds like 1 bad CV joint. Not sure which side. Look at the front axles, and if 1 or more of the boots are torn then that one is most likely the culprit. If you can grab the axles, feel ...

...to release the ball joint from the steering knuckle and remove the axle nut from the axle.Quite often need to use a air hammer or dead blow hammer to get the axle to release from the center hub

...dead stop, left or right, it makes this thunking noise, thought it could be the tires hitting? Please help, thanks Could be the tires, that is easy enough to check. Could be the drive axle joints. ...

...axle nut, a dead-blow (no-bounce) hammer to tap axle from steering knuckle, and then there are two options. Left (driver) side: a pry bar to pop the axle from the differential (pry between diff. ...

...axle replaced 2 months ago,, now went in for dead battery,,(unrelated) and rattling sound when turning left,,which their mechanic couldn't pick up the rattling until i went for a drive with ...

...axle remove the eight nuts and cones in the center, (if the cones don't come out hit the center with a dead blow hammer and the shock will loosen them) put a drip pan under the hub and slide the axel ...