...is probably a second hand shop somewhere around that has a used replacement real cheap.... 12 volt DC, 1.25 amp w/ the center being +. Or you can take it to a shop and have them check it out to see ...
Question about OneTouch 7100 Flatbed Scanner
AC instead of DC adapter connected to Visioneer 7100 I bought a Visioneer 7100 flatbed scanner (without a power adapter) at a thrift store. I was able to test it at the store with an appropriate ...
...both PNP and NPN transistors and neither help. Unit draws 470- 480 ma at 12 v from a lab quality DC supply. Um just as a thought, but often there is a physical "head Lock" thats used when ...
Question about OneTouch 5800 Flatbed Scanner
...the correct power supply for your scanner. If you are using a power supply that has the incorrect DC output, you will get a scanner locked error message. This flatbed scanners has I believe
Question about OneTouch 8100 Flatbed Scanner
...8100 scanner? Power supply details are as follows: Input voltage/frequency 100 Vac, 50/60 Hz (Japan) 120 Vac, 60 Hz (North America) 230 Vac, 50 Hz (Europe) Output voltage/watt 12 V DC, 15 watt ...
...or on the current adaptor itself and see what the power rating is. It will say something like "6 VDC, 1A" or "5.5 VDC, 3-5A". These are the two power ratings you need. VDC is the DC voltage, and A ...
...60 Hz (North America) 230 Vac, 50 Hz (Europe) Output voltage/watt 12 V DC, 15 watt maximum http://support.visioneer.com/downloads/Manuals/9220/9220_Install.OT3.EN.pdf If this helps, please give a ...
Usually answered in minutes!
53 Questions
45 Questions
28 Questions
24 Questions
16 Questions