Questions & Answers for: dc 60 Video Cameras

Question about AMPLIFIER, 1000 WPC, DDT, 8/4/2 OHMS => Model PV2000 Car Audio Amplifier

1 Answer

...60 cycle ripple on the DC voltage supplied by the power supply. If you have this problem I would suggest measuring the power supply with a DC voltmeter first and writing this measurement down. Then I ...

Ad

Question about 4400 Flatbed Scanner

1 Answer

...60 Hz (North America) 230 Vac, 50 Hz (Europe)Output voltage/watt: 12 V DC, 15 watt maximumIf you try to find an AC/DC converter yourself, make sure that the DC plug has the right +/- polarity and ...

Ad

Question about DC-T50 Digital Camera

1 Answer

Battery for DC-t50 Digital camera Battery over heats and will not hold charge ebay  NP-60 kit  2 batteries and a charger for like 10$  

Question about JVM1790 Convection / Microwave Oven

1 Answer

12 volts DC stays 12 volts constantly, positive or negative. 12 volts AC (at 60 Hertz or cycles per second) alternates from positive to negative then back to positive voltage again 60 times per second

Question about JVM1790 Convection / Microwave Oven

3 Answers

DC BLUE APR THRESHOID LOGO SERVICE: TUNER AGC HPOS 50 VPOS 50 VAMP 50 ULIN 50 HPOS 60 VPOS 60 VAM 60 ULIN 60 BRIGHT MAX BRIGHT MIN SUB. TINT VCO COARSE VCO FINE VCO COARSE L1 VCO COARSE L2 DESIGN: AGC

Question about OneTouch 8100 Flatbed Scanner

1 Answer

...8100 scanner? Power supply details are as follows: Input voltage/frequency 100 Vac, 50/60 Hz (Japan) 120 Vac, 60 Hz (North America) 230 Vac, 50 Hz (Europe) Output voltage/watt 12 V DC, 15 watt ...

Question about OneTouch 8100 Flatbed Scanner

1 Answer

60,000lbs) the 3rd is the posititon 1 : Flat, Horizontal, Vertical, Overhead.2 : Flat and Horizontal only.3 : Flat, Horizontal, Vertical Down, Overhead. The fourth digit is the current and coating 1 :

Question about OneTouch 8100 Flatbed Scanner

1 Answer

...DC. 60 in AC or 125 in DC. If you want to work with lowest amps available, just put the selector on AC and connect your cables to the 50/80 amp side. You should have a selector lever to switch back ...

Question about Thermadyne Inverter Stick/TIG Welder 185 AC/DC

1 Answer

...DC inverter If you are using a remote then you would set the machine in standard for controlling output and also to AC output, HF tig, contactor and control in remote position. I don't know if this ...

...you contact rabbit wine if your ac is 240 Volts and is not 120v 60 hz on the www,rabbitwine.com web site contact link or if DC voltage does not match. Or for advise on if it matches your

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...