Questions & Answers for: Dodge Dynasty dashboard fuse

Dodge Dynasty Cruise Control problem On my 1993 Dodge Dynasty LE, with 3.3L V6 and four speed automatic transmission, the cruise control does not work. It was sugggested that a fuse was bad, but the ...

...left strut tower. YES THERE IS A FUSE THAT U CAN CHANGE. LOOK UNDER THE DASHBOARD, UNDER THE STEERING WHEEL. OR EVEN TRY TO TURN YOUR HEADLIGHT SWITCH TO THE LEFT AFTER THE LIGHTSWITCH IS PULLED

dashboard above the fuse panel in the glove box. You'll have to remove the glovebox and stick your hand way up there to get to it. It's not the easiest thing in the world to do, but that's where it is

...dashboard, etc. Fuses fail for a reason too. If the fuse(s) for the dash/instruments blew, you may want to try to find out why (short). If you replace and it works fine just like always no other ...

i need to know where the fuse box is and what fuse is used for the headlights The fuse box will be under your hood in the engine compartment. It should be labled headlamp. Some are labled different, ...

blower motor wont come on First thing to do is check the fuse panel for a blown fuse. If thats the case just change it and you're done. If all the fuses are good then you have a bad motor. It is ...

What can I check if the parking lights do not come on? The regular lights and flashers and turn signals work. The first thing to check would be a fuse. Park lights use a different fuse than the other ...

1988 dodge dynasty blinkers won't work at all None of the blinkers will work. You can hear clicking when the 4-way switch is turned on, but nothing lights up. If it were a bulb issue they ...

tail light fuse blows when i turn the lights on 1989 dodge dynasty Remove the bulb and see if the fuse blows, if it doesn't you have the bulb installed wrong or the wrong bulb part number, if that

where is the fuse panel with the fuse #16 for the stereo on a 1993 dodge dynasty some clown bluw a fuse or pulled the stereo hot wire loose when he was fixing the heater core on the car... I need to ...