Questions & Answers for: Oldsmobile dash ignition

...ignition switch in dash, would like to know howw the old one comes out. installing new ignition switch in dash, would like to know howw the old one comes out. if this is an older car than what you ...

...ignition mounted in front dash). I had to take off the knee bump trim and the trim around the instrument housing and remove the instrument cluster. Leave it connected and just lay it on the dash. You ...

...ignition the dash lights don't light up when i put the key in the ignition the dash lights dont come on. the car will not start until the dash lights pop on. Measure for the ignition voltage at the ...

...dose anyone know where i can get the directions to remove the dash mounted ignition lock cylinder so i can replace it first time doing dash monted ignition lock thanx samantha Oldsmobile Repair ...

...dash monted ignition lock and does it have to be programed THE HAYNES REPAIR MANUAL IS WHAT YOU NEED.IT WILL SHOW AND TELL YOU HOW TO REMOVE THE IGNITION LOCK CYLINDER.YOU NEED A SCANNER TO REPROGRAM ...

...ignition on dash...not on steering wheel you will need to pop out the lighted ring around the switch, remove the radio and uder dash panels on the driver side near the ignition, this should give you ...

...ignition switch. Do I have to remove the dash to get behind the key cylinder? Check out http://99intrigue.shutterfly.com/ignitionswitch. You don't have to remove all of the dash, just the radio and ...

...will really help you is to notice you dash lights when this happens. If the dash lights go out when the car stops, then this is it. If the dash lights (ignition) stay on, then you have another

...ignition switch is that dash lights do not come on. vehicle may crank but not start. no current to dash lights, fuel pump etc. also check the big fuse in fuse box for the ignition switch. have a good ...

...ignition switch on 2003 Olds Alero without removing dash I'm having problems with the tumblers in my ignition switch and I needed a lock smith one day because the switch wouldn't turn I ...