Questions & Answers for: Chrysler Imperial dash bulbs

...bulbs. They've burned out. Banging on the dash probably allowed the filament of in the bulb to touch and temporarily worked. 3) I have a similar problem with the headlights. My headlights turn on ...

install headlamp switch headlights come on without tail & dash lights.... taillights come on with dash but no headlights... its either 1 or the other... is there a certain way to install the knob into

bulbs. Ok I have a 93 Chrysler imperial the dash lights stopped working the radio stopped working before the dash stopped working my heater control works and so does my cigarette lighter so what could

...both are okay. you can change the light bulb in dash board. Just take out the dash board, remove and replace the bulbs. Make sure fuse is okay. Is the signal light works in the dash board?. Let me ...

tail lights dont work this happens when the bulb gets fused so dont worry and replace it by the electrician k

...lights were working but my brakes and blinkers weren't and it turned out that a connection under my dash had come loose. After tearing my dash apart I found that there are no lose or missing ...

How do I fix the left rear turn signal lights when the right turn signal lights do work? usually it is just a bulb that you can access from the rear of the trunk

...the mechanic that looked at it said he doesn't think it has a cable. If you have the digital dash the mechanic is probably correct. The "body control module" is located under the passenger

hazard lights, break lights, turn signal lights wont work. Ive changed all the bulbs and they still wont work. have you checked to see if you have any power to lights. it might be a blown fuse! if you

How do I replace the front park lights on a 93 Chrysler Imperial? How to get access to the bulbs for replacement of front park lights. access through the headlight hole.