Questions & Answers for: dark print

...disappear after 50 pages or so, unless the printhead is damaged. If the print remains dark, the printhead will need replaced. (Very expensive) (Dark print can also be caused by using Non-Xerox

can't save the printer darkness in the printer I am using a Zebra Z4mplus barcode printer. when I send print from the system the darkness of the printer dicreased.there for I can't get a clear print. ...

for this? yes.there is a adjust ment.go to printer properties and there printing preferences and there adjust the print quality to normal which is set on beat mode so the prints are comming extra dark

...enough printer will not print dark enough - have replaced ink and toner still too light to read model clx3160fn go to the print settings select the dark scale u can get print darker than the ...

...driver and easily adjusted there. There are many types of printed materials and tapes different in each type of labes, you must adjust the dark and print speed for the type of label. Roberto ...

dark print out PRINT OUTS ARE DARK ON THE OTHER SIDE, SOMETIMES THERE'S A LINE ? check the fuser... to see if one of the rollers has toner all over it... then check your paper path... to see if you ...

want to get the print darker so I can read it ..... there is a option u can do it dark and light,,, press dark or light botton, than its gives u dark print ,, if there is ok than change your cartridge

the following darkness modes:1>Lighten: works well with dark print.2>Normal: works well with standard typed or printed documents.3>Darken: works well with light print or faint pencil markings

...print out is dark my machin print out is drak befor earror code seting is ok but just print out is dark may develop seting is 38- 142 i want anather seting for best printing ok keep the develop ...

c451 prints too dark the prints come out too dark copies or prints to dark or both????