Questions & Answers for: damper pulley

...damper pulley while you loosen the bolt : Here is an example of one that I used on a Honda: http://www.ttnet.net/ttnet/gotoprd////0535051303034383933343.htm Often , auto parts stores have a "loan a ...

Ad

...damper pulley off. I can't get the crankshaft damper pulley off of a 2000 Dodge Stratus, 2.4L, DOHC. My end goal is to remove the timing belt. I have already removed the accessory drive belts, but ...

Ad

...pulley, and then pound the damper into place until its pulley aligns with the water pump pulley. It is advisable to use the installation tool, because pounding on the damper can cause stress on the ...

...pulley. Remove the crankshaft damper attaching bolt. Attach a suitable puller to the damper and remove the damper from the crankshaft. NOTE: On certain models, removal of the cooling fan, fan shroud ...

Question about 1990 Ninety Eight

1 Answer

crank pulley damper, crankshaft damper, torsional damper, or vibration damper) is a device connected to the crankshaft of an engine to reduce torsional vibration and serves as a pulley for drive belts

Question about 1999 Escort

1 Answer

...pulley damper 819A216Belt idler pulley 98620Drive belt NOTE: Drive belts (8620) with automatic drive belt tensioners (6B209) do not require adjustment. NOTE: When a new drive belt is installed or a ...

Question about 2001 Alero

1 Answer

...pulley bolts have become loose or if the damper on the crank is loose. If you find the pulley loose, if the bolt holes are not elongated, just tighten it back up. If the damper is loose, remove it ...

...damper pulley is the outside pulley on the harmonic balancer. It's the smaller of the two flywheels. It's there to absorb the jerking from the rotation of the crank shaft. Basically the same ...

Question about 1999 Taurus

1 Answer

pulley to damper retaining bolts and remove crankshaft pulley. Zoom and Print Options 6. Remove crankshaft damper retaining bolt and washer. 7. CAUTION: Use care when removing damper so as not to

...pulley, but cannot loosen the damper bolt....tried an impact wrench. I also tried locking the damper in place using a box wrench on one of the pulley bolts, locking it against the frame while turning ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...