...me This is a interference motor. If the timing belt broke the valves will have fallen in to the cylinder and you will need over hall. Yes it is true so you will also need a head to this motor . ...
...that the disributor cap fires on a 1991 plymouth laser. and also what is the firing order for the cylinders? Thank you Your firing order is 1-3-4-2 The rotor in the dist cap rotates clockwise, ...
...order. While doing so, make sure there is no slack between the sprocket except where the tensioner is installed. Recheck the timing marks' alignment. If all are aligned, loosen the tensioner mounting ...
...and still wont fire First thing to check is if rotar on distributor is at #1 plug wire when #1 cylinder is at top dead center. This will ensure the timing is set
i have a 92 plymouth laser, 5 speed. it has no pressure on the clutch and it takes pumping the clutch to get it into gear. what should i do? replace the clutch slave cylinder
Cylinder Firing Order: 1-3-4-2 Cylinders: ...........(back).......... |...1....2....3....4...| ..........(front) Ignition Connections: (back) ...3 ...2 ...1 ...4 (front) Let me know if this helped, or
...There often is some pretty severe head damage that results from this type of impact and the the cylinder head will need to be removed and closely inspected & repaired as
...the clutch lever is. It will have a cable attached to it with an adjustment or a little hydraulic cylinder, with or without an adjustment. Just adjust until the pedal has about one half to one inch ...
...not it's the whole clutch kit, or if it is the transmission? I just changed out the clutch master cylinder, in your opinion, what is your best experienced educated guess in what to do about this? ...
what is the firing roder of a 1994 ford laser ? what is the firing order of a 1994 ford laser Here you go compliments from www.autorepairhelp.us
Usually answered in minutes!
38 Questions
35 Questions
34 Questions
36 Questions
