...CX8400 I have a 8400 and when I try to print the black does not work. I have cleaned the heads and done nozzle checks and the black still does not print. But if I use scanner and copy I get black ...
Question about CX8400 All-In-One InkJet Printer
cx8400 All in one inkjet does not print well (ink is new) I have bought new ink 69 (colours) and black 69 a few days ago, once I got home, I started printing in black and white and the ink looked like
Question about CX8400 All-In-One InkJet Printer
When I print/copy it is missing lines of ink and not getting the whole image. I replaced the ink and have cleaned the head Sometimes it requires several head cleaning passes to fix missing lines. Make
CX8400 will not print black text? 1. Press Setup 2. Select Maintenance and press OK 3. Select Nozzle Check and press OK 4. Press Start 5. Check the nozzle check pattern that prints to see if there are
Question about CX8400 All-In-One InkJet Printer
my epson cx8400 is printing streaky, how do i fix this? Print head likely needs cleaning. Read your manual for instruction on how to do this. Typically accomplished from the maintenance tab in your ...
...clean or align the print head. ?If the page does not print, the Epson Stylus CX8400 Series may have a problem. Check for additional solutions. If they don't work, contact Epson. general= ...
Epson printer is only printing in Black and Yellow, but not in other colours which it should do, What is the problem? Go to printer properties and perform Head Cleaning and then print the nozzle check
...CX8400 IS ONLY PRINTING BLANK PAGES Its most likly a clogged head, now if completly blank this can be an issue as you have to do a head soak in a liquid solution. Epson will tell you its a HEAD ...
Question about CX8400 All-In-One InkJet Printer
clean printer heads of Epson CX8400 ? I used the Epson's tool kit program to clean but not satisfied I used Q-tip with Isopropyl alcohol . now only the cyan prints. 1) Cleaning the print heads
Question about CX8400 All-In-One InkJet Printer
my Epson stylus cx8400 i did a nozzle check and a head cleaning and my nozzle check still comes out skipping sections what is my next step i even adjusted print head and no good If it has been a while
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions