...nut that holds the cv axle tight to the hub assembly. Then you have to bust loose your upper and lower ball joints. After then its 4 or 6 bolts where your cv axle attachs to your front
...cv axle?also is the hub have to be pressed on and off,or can i snug it up with the axle nut? You will have to remove the lower joint to remove it. You can snug it up with the axle nut but it will ...
sporadic grinding noise driver's side. 2001 Dodge Dakota quad cab 5.9l I have replace both cv axles. check the outer bearings and if it is while you turn the wheels check uger strut mount and condroll
popping noise when turning corner Check your CV boots on the axle. If boots are torn, joints are likely worn out--replace axle. Let me know if you have questions.
...it starts making this clicking gring sound from under the driver area i pulled the wheels looked at the universals it starts then stops You have a bad joint in the front axle (Possibly bad CV
axle joints. Does it do it any other time? if so, check the cv joints and replace the axles if necessary. You can check the axles for tightness by laying under the truck, doesn't need to be in the air
how do you replace a cv joint on a 1989 dodge dakota? Unbolt the axle from diff & remove the outerend from the steering knuckle & replace theentire axle
I have a problem on the left front side with a clicking sound that will not go away I have replaced the cv axle, tie rods, brakes, rotor and the noise will still not go away wheel bearing
squeaks driving i have squeaking son a differential moves ive replaced both hub bearings and axle assemblys driving me crazy check the "U" joints for dry and worn. check cv joints as well
...axle inside cv is stuck how do you remove Every one I've replaced was stuck. You need to jerk it out. I've pried carefully with a flat blade screwdriver and I've ised a small pry bar as well. Some ...
Usually answered in minutes!
1,021 Questions
870 Questions
712 Questions
723 Questions
618 Questions