Questions & Answers for: crown victoria reverse

2000 crown victoria my car will not go when i am in any gear except reverse.can anyone help as to what the problem may be .thank you forward clutch set in trans... aamco is very good and reasonable.

...CROWN VICTORIA POLICE INTERCEPTOR AND THE CAR RUNS GREAT IN THE FORWARD GEARS BUT WONT DO ANYTHING IN REVERSE. I CHECKED THE FLUID AND PULLED THE PAN. NO METAL PARTS IN THE PAN. COULD IT BE A PROBLEM ...

my 98 crown victoria Won't move forward but will move in reverse sounds like the tranny is low on fluid or the tranny is going out try manuly puting the tranny in 2nd gear and see if it will move

...Crown Victoria? Thanks SedansRemove the screw(s) and wing nut retainers at the rear of the luggage compartment and push the trim away from the back of the light. Remove the wing nuts retaining the ...

My crown Victoria will go in Reverse but wont go in any drive gears check the trany fluid if its full then i would say you need a trany rebuild.

have a 92 crown victoria drives good in drive but when car warms up reverse doesnt work THE REVERESE APPLY CLUTCH BAND IS WORN OUT, THIS MEANS THE TRASNMISSION MUST BE TORN DOWN AND REBUILT.

i have a 93' ford crown victoria and sometimes it wont go in reverse yet all the other gears work fine Sounds like a bad reverse band problem... be ready to replace the transmission soon.

My crown victoria will go in reverse but wont drive Linkage is suspected. Does the selector go into gear? Something could be blocking it physically, how long since the filter was changed.

p71 04 crown victoria reverse lights and tag light not working checked and all fuses and bulbs ok DTC P7104 isn't a code listed. Confirm us.

crown victoria 99 won't go forward goes in reverse You have a 4r70w transmission and more than likely a forward drum failure has occurred, seeing as reverse still works fine and no forward engagement.