Questions & Answers for: crown victoria misfire

...Crown Victoria Police Interceptor.....4.6L engine. I have a misfire in cylinder #1 and spark plug is covered in oil. Are the piston rings fried? Will replacing the heads fix the problem? Thanks so ...

...crown victoria interceptor i bought a 2000 crown victoria police interceptor with a 4.6 v8 and after a day the engine light came on, so i took it to get checked and it said that cylinder 4 had a ...

...crown vic police. Had check engine light with misfire code to cyl 3, 6, 7, 8. Changed plugs and new coil packs. The car still shows misfire codes and still runs bad. Any ideas? your egr on that side ...

...crown victoria is misfiring at high speeds even after i changed all coils and put the right gapped spark plugs in i had it checked on a scanner and it said cylinder 5 was misfiring so they took the ...

...crown Victoria with police interceptor...when driving the car if you really apply the gas it has no power but if you ease into it you are ok. No it is so bad that you idle fine then apply gas it ...

Does a 2003 Crown victoria have problems with the accelerator? misfires and lack of fuel when accelerating

crown vic i need to know these touble codes po305 po304 P0304 means that cylinder 4 has a misfire and P0305 is a cylinder 5 misfire. What this means is you may have bad spark plugs, or bad plug wires,

...crown victoria the check engine test says it coiuld be my catalyic converter and a misfire but the problem is when im driving and the car gets to 30 40 mph it jerks and the car seems like its holdig ...

...crown vic police interceptor cylinder 6 misfire Engine Misfire diagnosis can be complex and there are many reasons for misfires to occur. I suggest you read the article at this link that deals with ...

...crown victoria misfiring loss of power under light to heavy acceleration, rough idle Ok, has little power left, misfires audibly under hood area when under heavy gas, rough idle, and one very ...