Questions & Answers for: cross threaded

Question about EVOLT E-300 Digital Camera

1 Answer

...cross-threaded. Have you gotten a lens off and looked closely at your camera lens threads. Are they crunched together. You may need to get your cameras lens mount replaced and check all your lenses ...

Ad

Question about Eterna Highpower (15x51) Binocular

1 Answer

...cross threaded (this is bad news). Unscrew the lens all the way. Press gently against the mating surface and back off 8ntil you feel it "click." Then, VERY gently, screw it back in, stopping if it ...

Ad

cross threaded the plug,take it out and hope to g.. that it goes into the correct thread using very little force.if you have cross threaded it then you will need to take the head off to fix it,5 hours

Question about 1999 Jimmy

1 Answer

...turned a 1/4 turn and locked down didnt want to force it no dont force spark plug its trying to cross thread.back spark plug back out.apply thin coat of anti seize compound to spark plug ...

cross threaded washing machine inlet The unless on my washing machine is cross threaded. Is there a way to fix this or does the assembly need to be replaced? You will need to replace it. What is your ...

If a bolt is cross threaded and won't come loose If a bolt is cross threaded and won't come loose how do you get it loose? Try one more nut to rethreaded.

cross-threaded when I got it New from Home-depot and it was leaking a little, then it started leaking a-lot. Use nylon plummers tape to wrap the threads. Try to get it to go back in NOT cross threaded

Question about 5-speed Blender With Glass Blender Jar Ksb565er

1 Answer

cross threaded I bet you're cross about that. It's a shame you have not bothered to tell us what is cross threaded.

Question about 5-speed Blender With Glass Blender Jar Ksb565er

1 Answer

...tank. it seems like the filling cap is cross thread I'd take it to a dealership before you run out of gas. If it is cross - threaded they have the tools to safely remove the cap and install a new

cross threaded for standard? NO -- cross threaded is when the bolt or nut has been installed so that the threads bind up over each other and jam I suspect that what you are trying to ask --is the bolt

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Cameras Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66827 Answers

Are you a Cameras Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...