Questions & Answers for: Buick crank removal

v belt broke rapped around crank pully broke sencer wont crank The crank balancer pulley needs to be removed so the crank sensor can be replaced. You will need an air impact wrench to remove the ...

Ad

...buick skylark-manual window there is a special tool that can be purchased that slides between the crank and the door panel. It is used to remove the retaining clip that holds the crank on the

Ad

I need to know what size wrenches are needed to replace harmonic balancer and crank sensor on my 1989 buick century 2.8 ltr. engine you will need sockets,the crank bolt i belive is 22mm and you might ...

Question about 1991 Riviera

1 Answer

crank sensor location on a 1991 3100 motor 1991 Buick Rivera only came with a 3.8L engine known as the 3800 The crank sensor is behind the Harmonic balancer / Crank pully. Special tool required to ...

Question about 1997 LeSabre

1 Answer

...the windshield washer fluid hose(s) Disconnect the wiper arm transmission drive link from the crank arm using a suitable wiper transmission separator tool. There is a special tool available to ...

how to replace a crank sensor on a 95 buick regal 3 8, most of all just have an idea how to remove the crankshaft. That's the problem. Crank sensor is not in the crank case itself... it is behind the ...

...& InstallationTo Remove: Using the J 39232, remove the wiper transmission from the wiper motor crank arm. Remove the wiper arms Remove the air inlet grille panel. Disconnect the connectors from ...

Question about 1991 Riviera

1 Answer

how to replace a timing gear Remove the bolt in the center of the crank shaft damper pulley Use a special puller to remove the pulley Remove the timing cover & use a puller if doing the crank gear

...fto water pump hi i cant get the last bolt out of the cover panel on my fto , its just behind the crank pulley , do i have to remove the crank pulley to access the water pump Remove the bolt for

Question about 2001 LeSabre

1 Answer

my engine stalls? how do you replace a crank shaft sensor on a 2001 buick lesabre?? The crank sensor is located behind the crank pulley on the 3.8 liter. The crank pulley must first be removed. A ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

2002 Buick Rendezvous
2002 Buick Rendezvous

1,091 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...