Questions & Answers for: Plymouth Voyager crank pulley

...the spark plugs.. U need to probably change the crankshaft sensor (around the crank pulley) as the crank sensor is what controls the ignition spark. hope that does it. :) what about the crank

Ad

with block of wood, maybe wedged shaped end, near base where it meets crank, all around as many spots as you can? Doesn't have threaded holes in pulley to thread in bolts to push against crank does it

Ad

...pulley in-between the a/c compressor and crank shaft it is a little higher than a/c compressor and has a 15mm socket sized nut on the front. loosen the nut and behind the pulley should be a long 10mm ...

...crank shaft seal. easy , you must learn to improvise ,use a nice knuckle bar ,preferably snap on then jam this in the suspension with the socket on the nut and turn starter motor .it will come undone ...

...pulley.3L v6. where is it coming from? Oil pan gasket or crank shaft seal its going to be one or the other you just have to get down there and see which one it is. either a cam seal or more than ...

crank pully off. Ah, The serpentineIt's easy and doesn't require a prybar. Here's how: Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar. The tensioner pulley is near the Alternator

Question about 1999 Voyager

1 Answer

...with a timing gun and sharp eyes - should be marks on the crank pulley or harmonic balancer and another mark on the block - when the marks line up when the timing gun flashes, you are at base

...pulley to the crank shaft on a 98 Plymouth voyager 3.0 L engine. Torque setting for harmonic balancer / pulley on the 2.5 and 3.0 engine is 132 ft/lbs Please remember to rate this answer! Thanks, ...

Question about 1995 Voyager

2 Answers

...you I have to no more information like make and kind Engine 3L?bottom crank pulley right side up under idler pulley up to alternator down to power pulley up over tensioner pulley and down to

...crank pulley bolt cause the timing to be off 1994 Plymouth Voyager 3.0 V6 ? only if loose. why not torque it spec, then know yourself the answer>>? Where did you see timing off, doing what with ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...