CRANK to bottom of middle PULLEY - top of middle PULLEY to bottom of rear TENSIONER - top of TENSIONER to back to top of CAM. Remember the serpentine belt has ribs on only one side, the ribs face AWAY
crank pulley. As krivasfixya said, put a wrench on the crank and see if it turn's clock wise, if not, see if it will turn counter clock wise. If it doe's the chain is broken and bound around the crank
need to know where crankshaft sensor is located on 2000 oldsmobile intrigue near the crank pulley.
how do you fix the crank sensor on a 2002 olds intrigue You cant fix it you have to replce it. They are usually located near the crankshaft pulley.(lowest pulley on the motor).
...the crank pulley is, remove all belts remove crank pulley big center bolt, get a harmonic balancer puller, or 3 jaw puller and remove pulley, there should be a woodruff key its small so dont lose ...
CRANK to bottom of middle PULLEY - top of middle PULLEY to bottom of rear TENSIONER - top of TENSIONER to back to top of CAM. Remember the serpentine belt has ribs on only one side, the ribs face AWAY
crank pulley, some are on the back side of the block, all depends on what motor you have, if you stand at the pas front fender, it will either b strait down by the crank pulley on twoards the front of
...Pulley which is attached to the Crank Shaft but if that is damaged you have really got a lot more damage there than you have described. Serpentine belt will cost you about $40 at auto Zone and takes ...
...sensor located need to no where the crank sensor located crank sensor should be at the bottom on front of motor to side of the crank with the pulley and belts on it have a plug and wwires going to ...
crank sensor Where is the crank sensor what motor?the 3.8 is behind the crank pulley the 3.1 is on the block between the engine and trans
Usually answered in minutes!
988 Questions
829 Questions
835 Questions
385 Questions