Questions & Answers for: Ford Focus crank pulley

Question about 2002 SVT Focus

1 Answer

...pulley or exhaust ,cant seem to locate exact location ,noise seems to settle as car warms but sound is still there especially in the morning frist crank up water pump by teh sound of it seal ok but ...

Ad

Question about 2001 Focus

1 Answer

crank pulley (6) and/or A/C pulley (5). They're the two lower-most pullies. Remove pressure from tensioner pulley From above the engine or below, remove the belt. Re-route new belt as shown in diagram

Ad

Question about 2001 Focus

2 Answers

...Crank Pulley Installation This How-To Library article is for the FocusSport crank pulley, which as indicated on the FocusSport product information page, includes a 6061 aluminum lightweight crank ...

...crank pulley in the block. that you are susposed to put the pin in, (you supply the pin) I never had the pin, so I never did this part. It's to hold the crank in position while you do the work. as ...

Question about 2001 Focus

1 Answer

...crank ,without it you cannot get right pressure on the pulley bolt and in the course of driving the gearwheel slips and bang goes the valves and hole in a piston or two .the crank marks are on teh ...

Question about 2000 Focus

2 Answers

...on the upper radiator support. crank pulley to right to ac then up to power steering then left and under a guide to gen down and around outside of T to waterpump ,around waterpump and back to the ...

Question about 2001 Focus

1 Answer

crank pulley so before you start remove the rocker cover and turn engine over by hand so the slots on the back of the camshaft ar at the bottom and in line with the head ,use a piece of metal straight

...that goes into the engine block undo this and that is where the pin goes don't forget that the crank pulley gear is free wheeling so make sure you use a new crank bolt and use correct torque ...

crank pulley, or a plate of marks on the cover and a groove in the crank pulley. The pointer or plate could have been knocked off the timing cover. There will be a pointer sticking out from the timing

Question about 2001 Focus

1 Answer

...loose so before loosening an pulley u need to get tdc first and mark your cam and crank gear if theres no marks to be able to get the correct timing set again or you will hurt something in the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

Manuals & User Guides

Loading...