Questions & Answers for: Nissan crank pulley

...pulley on the crank is loose and wobbles and makes a noise until the engine warms up and suddenly the pulley runs straight, and the noise stops what? how? why? How is the inner pulley attached to the ...

...to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft

...pulley system. This is the tensioner. Use a wrench or a shallow well socket to crank it to gain slack and slide the belt off the uppermost most easily accessible pulley. The tensioner will probably ...

...crank pulley I have 1995 Nissan Maxima. On the crank pulley there's 2 marks close together and one mark not far from it. Which mark is top dead center? This is my third time taking it down. It keeps ...

...crank pulley(strap wrench) 6.Use a breaker bar,front pulley nut is 22mm Becareful at this area, when pulling out the pulley, If it is necessary for you to remove the front radiator. A crankshaft ...

...SEE MARK ON CRANK  PULLEY AND MARK ON TIMING COVER AND THAN YOU CAN REMOVE TIMING COVER AND CRANK PULLEY AND SEE MARKS ON TOP CAM AND CRANK GEAR,BEST WAY I CAN TILL YOU ,HOPE IT ...

where is crank sensor located on nissan maxima 3.0 crank sensor is at the bottom of the crank pulley. right under neith the pulley is a 2 wire sensor bolted to the engine with 2 bolts.

...crank pulley,its the big pulley at the bottom of the motor the cam pulley should also have a mark on the pulley if its belt driven that should line up with a notch on the head or tappet cover if its ...

...crank pulley All crankshaft pulleys have a timing mark. However, the actual marks can be different between manufacturers. Some have a notch cut on the rim of the pulley others have an arrow or a Dot ...

...CRANK Pulley CLOCKWISE One full rotation. This should bring the timing marks into the right position. The timing mark on the crankshaft dampener pulley will align with cylinder 1 TDC of both ...