Questions & Answers for: Dodge crank pulley

...steering down to ac compressor to crank...around crank to belt adjuster....over fan pulley to alternator up from alt and over both idler pulleys....a 17mm 12point wrench will fit on adjuster to move ...

...crank pulley. it will move the pulley down and loosen the tension. the power steering belt is loosened by a 14mm bolt on a bracket up and to the left of the crank pulley its a very unique bolt not ...

...hyundai elantra where would i find the crank sensor? Hello it will be located behind the timing belt and behind the crank pulley The timing belt DOES NOT HAVE TO COME OFF but the crank pulley

...crank pulley. Take off the belt and give them a good wiggle and spin. Wth the engine off, try wiggling all the pulleys one by one. Any that have excess play need to be replaced or the component they ...

...the crank itself after you remove the bolt,and this rod bottoms out in the hole so you are not pushing on threads in the crank and it has specialized arms to grab "that" crank pulley,hope this ...

...and after doing that the belt still does the same thing you could adjust your tensioner to fix it, but most likely your power steering pumps pulley is not completely parallel with the the crank ...

...the pulley counter-clockwise) power steering pulley (belt goes...clockwise) alternator (belt...clockwise) idler pulley (belt going under the pulley) and back to the crank pulley

location of the oil pump It is located behind the crank pulley. You will need to remove the timing chain, crank pulley and sump pan to access it properly. 

that has the rubber between the pulley and the center bit on the crank. Any other pulleys are normally bolted to this pulley on the center hub piece . I'm thinking that the mount bolts have fallen out

...positon sensor is on a 2010 Dodge Journey 2WD 2.4 liter engine Most of the crank shaft sensor are located behind the main pulley or crank pulley just follow the wire when u open up the timing ...