Questions & Answers for: Chevrolet crank pulley

...crank pulley (5 small bolts), and pull the pulley off the crank. Contrary to what the manauls say, the problem is the clearance between the crankshaft pulley and the frame will not allow for the ...

...crank case pulley in a 2003 malibu to place a new timing cover and need to know how to remove the crank case pulley should have 3 or 4 bolts in the middle of pulley and just remove big bolt in center ...

crank case pulley for 1999 chevy malibu Replacing serpintine belt but belt keeps slipping off and was told that the crank case pulley was needing to be replaced. Is this the actual problem or is there

the front (belt) side of the engine. all the way towards the bottom right behind the crank pulley. you have to remove the vibration damper and pulley to get to it. it will have two wires running to it

...front wheel and the splash shield, it should be there next to the pulley. the 3.1 engines crank shaft sensor is located behind crank shaft pulley.the 2.4 engine crank sensor is next to oil

...crank pulley around oil pan timing cover you will see it. the cam sensor is in the distributor. cam sensor is in the distributor, crank sensor is on the bottom front of the engine near the crankshaft ...

...crank pulley to access the timing chain cover. You can see the cover if you look behind and above the crank pulley. the cover will be held on by about 15-20 bolts. make sure you line up the timing ...

crank pulley/harmonic ballencer is almost a half inch off from all other pulley on my 99 3.1 malibe the belt came off, so i checked the belt for wear and tear and decided it was definately a bad belt.

crank shaft pulley not aligned belt keeps on slipping off, seems like the crank shaft pulley is not aligned. what can be a salution You may have a bad bearing or bushing in one of the idler pulleys, ...

...a replacement crank sensor reluctor ring This ring is part of the harmonic balancer/crank pulley. You will need to replace the crank pulley assembly. Contact your local auto salvage yard for a used ...