...crank position sensor on 1991 dodge dakota with a 3.9 liter engine 2wd auto. Can not find crank sensor on 1995 Dodge Dakota how hard is it to replace the sensor should be located in the top of the ...
crank position sensor location I have a 3.9 v6 dakota, Where is the crank sensor located? i can't find it should be on bell housing on thr driver side
Question about 2000 Durango
...crank sensor on my 2000 dodge dakota with the 4.7 Hello max06197: My name is Roger and I will help. You will find the crankshaft position sensor mounted into the right rear side of the engine block. ...
crank sensor location for 2002 durango 5.9 crank sensor location for a 5.9 durango should be on the drivers side back of motor stuck in the tranny bellhousing at the top held in by either a 10mm bolt ...
need to no where the throttle position sensor is located on 1996 dodge dakota 6cyl 4x4? is it easy to replace? the throttle body
my dodge Dakota keeps dieing every time i turn it on why does it do that? crank position sensor and/or cam position sensor bad
...crank position sensor 1996 dakota automatic tran what motor do you have?if it is a 5.2 it should be located behind the passenger side valve cover.it slides into the transmission bell houseing and ...
Question about 1996 Dakota
...crank position sensor In my 1990 Dodge Dakota 4X4 I have my starter off. I want to replace my crank position sensor, but haven't found where it's at. have a 1991/second month dodge ...
but no spark. I've replaced the drive coil,(disc under the cap and rotor), and the ignition coil. Still no spark. crank position sensor or cam position sensor, also check if the wires are still intact
Question about 1996 Dakota
...> Problems > Dodge > Dakota On the 3.9L V6 and 5.2L V8, an intermittent connection in the crank position sensor wire connector can cause poor engine performance or the engine may crank but ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions