Questions & Answers for: Dodge Intrepid crank position sensor located 97

...sensor needs to find the signal. The car lopes at high rpms. As long as the cam sensor is disconnected it runs but as soon as I connect it it won't start. Id Try a New Crank sensor.. Lemmie ...

Ad

...I believe the trans controller is the only module that needs that info. The Crank Position Sensor give engine RPM info and it is located on the bell housing near the engine block. I hope this

Ad

...sensor and crank sensors located on my car? I need a diagram showing where the cam sensor and crank sensors are located on a 1994 Dodge Intrepid 3.5l!? Crank Sensor: Passenger side of transmission ...

Question about 1997 Intrepid

1 Answer

crank shaft sensor supposedly out. Bought the part can't find where it goes?? Can anyone help me?? 1997 Dodge Intrepid 3.5L MFI 6cyl The Crankshaft Position Sensor is located: Under hood, driver side,

crank position sensor on a 1993-1997 intrepid is located on the passenger side of the transmission bell housing ( top ) breeze to change and usally fixes the cold starting issue with these automobiles

...crank the engine a very small amount at a time and observe the voltmeter. The voltmeter reading should cycle from almost 0 volts to a highter voltage of about 5 volts. Since digital voltmeters do not ...

...POSITION CENSOR ON MY 1996 INTREPID It should be on the transmission by the passenger side of car. It has three wires connected to it. 1998 Dodge Intrepid the crank sensor is on the passenger side of ...

...Sensor, Crank Sensor, Coil Pac and Computer ??? Cant Find the Fuel Cutout swicth/ Intrea Swicth Location , I Have a Runing Parts Car to Rob Parts from 96 Dodge Interped The inertia switch is in the ...

crank sensor on the right side (passenger) just on the back side of the seam between the engine and the transmission where the flex plate that connects them is located. It is just above the surface of

Question about 1999 Intrepid

1 Answer

Position of crank sensor Do you mean the "location" of the crankshaft position sensor?  If so, it is located on the right rear of the engine/transmission housing area.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...