...equipt. then remove the compressor mounting bracket. Next remove the engine mounting plate and the crank pulley and balancer assembly. you should now be able to remove the the 3 piece timing cover. ...
car wont crank 1994 plymouth acclaim i have a 1994 plymouth acclaim, and the other day, it jsut stalled and wouldnt start again, it will turn over but wont crank, i've replaced the computer thinking ...
...car just died and I replaced the coil but it is still not getting fire to the spark plugs possible crank sensor. withour the crank sensor it doesn't know when to fire the spark plugs. good ...
...died while she was driving it on the interstate one day. she tried starting it, but it would only crank and not start. what could be the problem? crankshaft ...
...1992 acclaim ignition switch Having problems with my 1992 acclaim replaced ignition switvch but no crank and not my starter what could it be??? Help please Neutral safety switch or starter
fuel pump turns on car cranks wont start. after awhile finaslly turns on ,but while running car turns off and again trouble turning on sounds like jumped timing belt
'89 acclaim suddenly stopped running. will crank but not start. fuel going into carborator. has spark (checked grounded plug). anyone have any ideas? Check timing belt to see if it still exists.
cranks but wont start you need to check for spark at the plugs while cranking.then check for fuel entering the intake at the injectors.you don`t say if its a 4 or 6 cylinder.if its a 4 cylinder you ...
...it. I have tried jumping it and everything it won't start. check ur starter if the car does not crank then thats what it is. This procedure usually works: ·Check the battery cable ...
...on 2.5 liter Acclaim. Replacing, but, where are the alignment marks? Thanks! # 1 cylinder at TDC. Crank sprocket and intermediate shaft mark align, crank at top, intermediate at bottom. Camshaft ...
Usually answered in minutes!
171 Questions
146 Questions
133 Questions
98 Questions
69 Questions