Questions & Answers for: craftsman straight shaft trimmer turning

...straight shaft will be a left-hand thread. HI, You need a long narrow 20T tork wrench to remove the clutch bell.Most stores that sell tools should have them. You stick the wrench down the opening of ...

...craftsman weedwacker model 31679108 Trimmer Starts but stall out as soon as throttle is used and choke turns off. if I hold the throttle and pull the choke it runs but will stall as soon as choke is ...

craftsman 27cc weed wacker will not turn shaft when running weed wacker starts fine, just will not turn shaft to engage head Replace head gear box.

...easily but the cutting head will not rotate you need to check and make sure the head is installed right ,, if it is sounds like you need shaft and see whats not turning and replace,, hope this ...

...Craftsman 4 cycle Trimmer's head turn counter clockwise Just bought and assembled weedeater and when I started it up noticed the head turns to the left, not to the right like my other trimmers do. ...

...thought they were supposed to turn right I have the yardworks curved shaft which is virtually identical to yours and it turns clockwise. Unless the straight shaft changes things but I do not think

Why when I pull the cord, the trimmer doesnot turn Will not turn if it is clutch driven. When motor starts and revs are up it will turn provided the clutch is working correctly.

...string cap and tighten nut or you will have to hold shaft just above string head with pliers and turn head by hand till tight. press the helpful button and check link below Craftsman 17 25cc ...

...Craftsman Straight Shaft that also takes attachments. Can I put the straight shaft attachment from the Craftsman onto the Cub Cadet and vice versa. I prefer straight shaft over Curve Shaft and prefer ...

The cutting head will not turn.this is a new one just out of the box then return it for a replacement