Questions & Answers for: craftsman impact wrench problems

...CRAFTSMAN 4 CYCLE STRING TRIMMER MODEL #358.796121. I GOT THE CLUTCH HUB OF BUT CANNOT GET THE NEXT PART OFF. THE PART IS THREADED ONTO THE SHAFT AND SHOULD PROBABLY TURN COUNTER CLOCKWISE. I CAN'T ...

...Craftsman pnuematic impact tool. problem is it seems to not engage in gear, however if the direction is reversed and then returned to original it will usually catch and "ratchet" as normal. Can I do ...

...impact driver, not expensive, and sold at most automotive stores, halfords, roadrunner etc. It impacts the stud, and twists at the same time, avoiding shredding the surface. It may still work on your ...

...impact wrench wont engage to the socket. I have the same problem, brand new impact wrench, brand new impact sockets, but can't get a socket onto the gun. Leaned on it with all my weight, wiggled, ...

...craftsman 1/2" impact wrench and connected it to my big 11 cfs dual tank compressor - but it will not take the lug nuts off my GMC Yukon. Whats likely the problem? It needs to be taken apart and ...

craftsman model 919.165300 compressor 5 hp 30 gallon.It runs it builds pressure and shuts off like its suppose to. The problem is when I attach my impact wrench to the airline and press the trigger on

impact just stops more than likely there is a problem in the hammer (clutch) mechanism (items# 24 through 30), there could be broken part causing the mechanism to jam, the hammer (clutch) needs to hit

craftsman service manuals Inherited this trimmer with purchase of property so don't know its age. It was tough to start but ran well enough the first season. This season, it ran but will not keep ...

...craftsman torque wrench. What is the proper way to replace it? I noticed that the nut on the inside came loose. If I re-tighten the nut will it effect the torque calibration? I don't know why ...

...craftsman pneumatic 1/2-in drive impact wrench. And used it with my craftsman 4-gallon 1hp air compressor tried to loosen the bolts on my car wheel wouldn't loosen them help Pneumatic tools are rated ...