Questions & Answers for: cp fuse

...CP works on another surge protector. TV wasnt on surge protector and wasnt on at the time, but now wont come on power wise. Also apparently have a microwave and a window AC that wont come on power ...

...CP-RS55 Multimedia... Problem hi i accidently jogged the mains input on the projector which then caused the internal fuse to blow i replaced it but it keeps blowing everytime i put the main plug back ...

no power lights one day it was working then it stopped.no lights come on at all.the power lead is working.any ideas? ok " could be a internal fuse, or bad transformer Id check for a fuse first

...focus and auto align not working,replaced 2 stk-392-560 Most times when the stk's are shorted the 5 amp cp fuse on the power supply opens. Check all of the cp's by the stk's and on the power

...cp fuse and it worked fine , the backlight on this set was fine just no picture , did notice the 2 small regulators had been getting hot so added a thick thermal pad between pcb & metal shield

...front? in a 4 cylinder diesel 2x cp 70 in front cp71 in the rear the reason why inline fuse blew cause by an electrical fault in the alternator thanks heaps after the alternator was replaced it ...

...fuse is ok, cp 150, cp 120, cp114, replaced..power cord ok . wher to begin..?? If youre not getting a power light then its most likely the AC main filter board ( Where power cords plugs into ) or if ...

...cp-x301 projector will not power on. Is there a physical reset somewhere? There is not physical reset switch. There is a switch to the right of the vga input but this is only for when you can't shut ...

no power taken cover off, is there a fuse or reset button. Could be both ,there is 1 1.4 amp fuse for 220v or 3.3 amp fuse for 110 volt model.Fuse should be visible,some came with what looks like a ...

where is the fuse in cp-x340? where is the fuse Inside the main power supply. However if the fuse blew out something caused that. be very careful. Fuses do not fail on their own.