noise in engine at 2000rpm could be a few things.... check you primary chain tension, if thats not it check cam chain shoes and tension.and finally if that isnt it check your stator bolt.Mine came ...
Question about 2008 FLHX Street Glide
...replace all associated parts including the crank shaft!! 7-9 hundred $$ probable cost. That just doesn't sound right to me, how bout you? AND.. another guy was in the dealership for the SAME problem, ...
...replace stator. 9. With ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator. 10. ...
My 06 street glide doesn't seem to be charging the battery all the time my gauge for volts jumps around from 12 to16 then my battery light and engine light come on Voltage regulator is going/gone ...
compensater removal compensater broken have sproket off .compensater in pieces. how to remove it. Hi Ma1124, for more information about your question please visit the website below. Good luck and have
Question about 2006 FLHX Street Glide
how change the stator on a 2006 harley davidson street glide Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day. Stator Repair 1 of 9 ...
Question about 2007 FLHX Street Glide
why does the check engine and battery lights come on that then goes off? this happens after I cut it on - First check the battery connections to make sure they are tight at both ends. Second, check ...
stator plug leaking oil Hi Bobspinavega, you must remove the stator plug and remove all traces of oil (Brake Kleen) from plug and hole, then seal plug with silicone, for more information about your ...
...replace stator. 9. With ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator. 10. ...
Question about 2010 FLHX Street Glide
...replace stator. 9. With ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator. 10. ...
Usually answered in minutes!
644 Questions
133 Questions
72 Questions
82 Questions
68 Questions
