Questions & Answers for: what is the correct oil

...oil is 1/4 below the bottom of the top hole on the dip stick. Which is correct?1/8 is correct. You are looking at an early version of the 2007 manual. We have already corrected that in Version 2. We ...

...the adjoining surfaces and ensure they are not damaged. Lightly grease the gasket and fit to the oil pan/sump. Replace the fastenings to the correct torque. Replace the oil with the correct

...rings having to be changed in the end. The question is, whare is the fouling coming from. Is it the correct oil level and correct grade oil. I would consult the manual. Maybe the plugs are too

correct oil pressure for 2000 grand jeep cherokee larado its about 75 now. i want to buy this car but worried about the oil pressure. Normal oil pressure should be between 40 and 60 psi. A cold engine

...high oil pressure reading you are getting is correct. Before doing this change the engine oil and the oil filter and ensure you use the correct oil and only fit a quality and correct spec oil

...correct oil filter was used. Hi, I also think the oil change may have caused your problem, in your area what is the correct oil for this engine??? have you used the recommended oil filter?? If you ...

...correct oil then drain it out. Wait say 15 minutes then refill with the correct oil again and it will be ok The method is to use correct oil to flush the existing oil out of the system Hi, I do agree ...

...offer oil selector programs for customer use on their web sites so if unsure use these systems to ensure you are using the correct oil.. 1997 Toyota for the easy solution download the pdf ...

...up if i stop goes offthen back on again If your oil is at the correct level, then the oil level sensor is not working correctly. If your oil level is low, then you need to fill it to the correct ...

...correct amount of oil to ensure that the forks are functioning properly. If your Suzuki GS 750T has standard telescopic forks, you will need to add 10.8 ounces (320 mL) of fork oil to each fork. If ...