Convergence Board Samsung Part Number: BP9500142E Samsung Part Number: BP95-00142E This convergence board works with the following Samsung television models: HCM4215W, HCN529WX, HCN559WX/XAA, PCN5425R
...convergence board if it does. Thanks for your suggestions. Samsung must have changed the part number several times on this part, as I cannot cross reference the number that is currently installed. I ...
...convergence problem the picture is colorful and bright Hello, I had the same issue as you pretty much exactly and so do others right around this last few weeks so I am thinking that this is a common ...
Samsung/BP9500142E/New.aspx Convergence amp ic bad http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html Sony Convergence http:
...convergence board in my samsung 54" pcl542r rear projection TV. I am looking for the part number for this tv. Thanks Samsung part number AA95-00706C its available at www.partsstore.com Panasonic ...
...samsung convergence /deflection board has the flyback transformer and convergence ic's mounted on it you change it as a unit and must realign your convergence after if you don't have the service ...
Question about HCN473W 47" Rear Projection Television
...control will disappear / inactive in TV menu when Convergence out section got failure. Please replace convergence out board in TV to solve this problem. Is it Samsung HC-N473W model?
Question about PCJ522R 52" Rear Projection Television
...or TV buttons Ur convergence is dead.Must change the convergence board.Buy the whole refurbish convergence at Tv repair world.com for the replacement.The Samsung/Akai use the same convergence
Question about PCL545R 54" Rear Projection Television
...54 in. Rear Projection Television. Perfect focus doesn't work either. Try website like Tv repair World.com to buy a whole convergence board to replaced.Samsung/Akai use the same convergence
Question about HCL4715W 47" Rear Projection Television
refurbish tv convergence board for the replacement.The DLP tvs brands names Samsung and Akai used the same tv convergence board.Or tries those tvs shops will cost u like $300-$350 for parts and labors
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions