Questions & Answers for: conv eng

...Eng that's why thay do not have any resale value Try replacing the oil pressure sensor they are only about 15 bucks that should take care of your problem I had this same issue on my 99 Sebring conv. ...

Conv. is the source of your problem, but without hooking up to the factory test equipment at my disposal at my Ford dealer this at best and educated guess based on 20 years of emission related work, I

...eng in which cyl. #2 is snsr #1 referes to the sensor before the cat. conv. and the code is for a slow response so, basically a lazy O2 snsr. So if you can locate cyl. #2 and follow the exaust ...

its on when you fix or clear ck eng lite itll go off I have a 04 sienna it has bad cat conv and it comes on every couple of months I just clear it cause a cat costs like400 eventually ill fix it right

Conv. After resetting computer (car sat for 2 hrs), started again and no "Ser. Eng" light... drove for approx 1/2 hr and light came on again with same codes. I would assume delay rules out A) & D)

...conv ic's and 1.2ohm res I am an Aud Eng with Olympics, Broadcast, Webcast, Corporate experience and just need a Tech Schematic (and help with) replacing my Conv. IC's and 1.2ohm res. in my PANA ...

...triggers your ck eng ligh and it is located both up and downstream of the Converter. Won't hurt to have it chk'd. If there is a sulphur odor coming from the exhaust, The cat conv is bad. Good Luck, ...

Check engine light (yellow) on changed Plugs,wires,cap,catlistic conv and about 4 different sencers light still on what is the trouble code that is causing the check eng light to come on.

eng starts hard,runs good until the rpm is over 2200 then it stumbles my input voltage on the cam sensor is 5volts ,on most cars i've read should have 8volts where the crank sensor input voltage is 5 ...

oil light 06 chyrler conv on @off at idle V6 eng. Could be a defective oil pump