Questions & Answers for: Kodak EasyShare contacts bent micro sd card

...more work but so far i havent had a lock up on that or error yet. go to tigerdirect.com if you want to see the different adapters for the sd disk and micro disk and usb etc.... maybe this might ...

bent. I also noticed no rub marks on some of the contacts on the card. I'd like to say that it was because it was a generic card manufacturer, but there's no real way to know if that was the issue. If

...SD or MMC cards, it is likely you bent or broke one or more of the connector pins in the camera..Bent pins usually break if you try to straighten them. Repair costs will probably cost as much as a ...

...micro SD card that I would like to use with the camera. Any thoughts or suggestions are greatly appreciated! The camera doesn't support this memory card. Memory card support : SD/MMC up to 2 Gigabyte ...

...micro SD. I'm wanting to print them directly without having to email them one by one. The only way I'm told I can was to purchase an adapter that fits into my camera. When I put this tiny micro SD ...

...micro SD cards. If you buy micro SD card, then you also need to buy an SD adapter. SD adapte is very cheap, usually less than a dollar. The maximum size SD card you can use in Kodak Z915 is 32GB SDHC ...

...would be to find a micro SD card for a cellphone. If you could find one on sale that came with an adapter, there's no reason why you shouldn't use a micro SD card with its adapter in your

contacts have bent and are holding the card from going all the way in... Try the card in every position, and then look inside to see if a contact is bent out and stopping the card from inserting fully

...micro SD card (It says:No pictures or videos to display) the picture thumbnail only shows a question mark Please connect your camera or SD card into your computer and make sure there are pictures ...

Micro SD memory cards has a small slide switch on the edge of the card, which write protects data on the memory card or add photos to the SD card. Slide the switch from the LOCK position to the UNLOCK