Questions & Answers for: connect alarm horn

...it's the black wire at the steering column, I would need make and model of the alarm you have to tell you which wire to connect to activate the horn when the alarm goes of or is armed or

...horn, depends on the type of alarm you have. Does it sound the same???Disconnect the horn and jump the horn with 12V If it doesn't work then it is the horn. If it does than it is the switch or

horn to the alarm using a relay. I installed a relay under the hood and got the power from the battery the problem is that now the horn from the steering wheel will not honk anymore. I checked all the

...alarm not the horn. Connect the battery when the alarm sounds go to the drivers door lock with the key and lock and unlock the door until the alarm goes off . Then reinstall the fuse for the

...horn honk during alarm feature. If this is the case then you almost certainly had to install a relay from your horn wiring. and probably misred the pins. Here's what happened: You've mixed up ...

...alarm now. Could it be just the horn? How can i test the horn? There is only 1 wire and it looks like a ground connection where the horn is attached to the body. horns if not used to full intent can ...

...alarm. It's a remote starter with keyless entry! Do you want the horn to sound when locking and unlocking? First, make sure that the horn wire was connected. Press and hold the lock button on the ...

...horn. Please tell me how can i fix this issue. Thank you take off the siren and connect it to the battery, if it works check the alarm wiring. if the wiring is good check the output of the

...connections -bad earth, low charged battery in alarm, loose battery connections ) will cause the horn to sound --same as too sensitive a setting for the alarm or a intermittent power to the ...

...connect them directly to battery terminals. But why do they work when I use the alarm clicker? That means your horn and electrical to the horn are good. You may have a bad clock spring under the ...