Questions & Answers for: too much compression in my chain saw

...chain oil! Any experience with this dumb design problem? Thanks, Bernie These oilers are called diaphragm oilers and work fairly well when the saw is new with great compression. As the saw wears out, ...

...chain saw, when it runs it runs great but sometimes it won't start. I think it is an electrical issue. I changed the spark plug - no improvement. What could be wrong? It must have spark, fuel and ...

...chain oil tank full. 3) Push down choke to full 4) Pull over engine 2 times. 5) Push choke off 6) Pull over engine. If it does not start you may have flooded engine ect. Please let me know. Start ...

chain saw will not start model #3314 14 inch I followed the directons on saw yet it will not start I also have the manual and followed the directions How many hours on the unit? Does it have spark? Is

...Chain Saw will not start seems to be getting gas and spark. the mag key is not sheared. feels like no compression Is this machine mechanically sound, remove the muffler and take a look at the piston ...

...chain saw after chaning the blade the brake is to compressed how do i fix it? There are a number of ways to do this, the easiest way is to remove the clutch and sprocket, the cover will then fit back ...

...compression check good. changed guide bar, chain, and clutch drum which had grooves/pits in it from the underside of the chain. checked oiler..good. could it be the actual clutch locking up the saw? ...

compression test on poulan pro chain saw I got a 105 psi compression test, Is it OK ? Yes, but 100 or lower and you need to think about ring and/or cylinder, piston and ring set.

What is normal compression reading in psi? 120-150 psi is good compression

...Compression on Poulan Chain ... homeguides.sfgate.com > ... > Other Types of Mortgages Many makes of gasoline-powered yard tools, including Poulan chain saws, use two-cycle, or two-stroke, combustion ...