Questions & Answers for: Sharp Aquos color reset

I have a 42 in. Sharp Aquos HDTV - accidently pulled the plug while the tv was on - and now the colors are primarily green/yellow and blue- seem to have lost "red". I've tried to reset to factory ...

...color and still not right? TV is less than 2 yrs old. From all sources? cable/DVD/other inputs If it is from everything, you could try to reset all settings back to the factory defaults and see if ...

...color. I suspect one of the colors is not working. Cables are connected according to instructions and cable ends look good (no bent pins). Help! Also tried the reset but no change. Bad cable? Try ...

...reset it to its factory setting to no avail. what is the possible cause of this and how to troubleshoot. thank you. Menu/Video Adjust/Color System. Should be set to N358 probably. This is the down ...

color and reset to default should fix it.You may have to adjust color for your best viewing. Good luck. you have a bad video out card or projector tube.ti is best to call a tv repair man.   

...reset to your set and see whether it helps you.  If it doesn't help you to correct its color, T'Con board [Timing Control bard] of your set needs replacement.  But before replacing ...

color. i don't think i have reset anything because upon switching it back on after an hour, the display is already in black and white. no amount of resetting the picture set up have turned the

...reset and adjust color but nothing works It's likely the cable (HDMI or Composite) that you have plugged into the back of your TV. First try unplugging then plugging back in. If that doesn't ...

I have a sharp aquos 42 inch television... the color started going bad and has gotten progressivly worse... I have tried reseting it... I have replaced the Main board (on someones suggestion).. but no

can hear the tv, but not picture Try resetting to factory settings looks like somebody might have played with the color, contrast and brightness settings.