...cold water vavle is opened all the way, then checked for a kinked hose. if both of those is ok there is a screen in the valve that catches trash in the water. remove the hose from the machine (and ...
...cold water. I can wash with hot water with no problems. I have even switched the hoses around thinking that i could wash with cold in the hot cycle but that don't work. I know that water is flowing ...
...THE MACHINE OFF LEAVING WATER IN THE BOTTOM OF THE DRUM. How do you fix this problem. Thanks its a inlet water supply error code check your cold fill line and fill screens at cold fill valve for ...
Question about Elite 45986 Front Load Washer
,,, bleach and detergent tray work fine ,, what could be wrong your cold water may be the issue, turn off your water and check the screens to the cold water side. make sure the machine gets cold water
...cold water? Sounds like it's not getting cold water in. Check your screens on the water valve where hoses connect. I cannot see your reply due to some tech issue w/ the site, so it may be a day or so ...
...cold water that fail occassionally. Try running just the hot or cold water (Its unlikely they both failed at the same time). If either the hot or cold works, then you have a bad solenoid valve. They ...
Question about Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker
...cold water reversed My new Kenmore Elite front loading washer (model 46742 - HE3t) draws in hot water when I want to run a cold water wash and vice versa. The repair technician ordered a new wire ...
...cold water will not fill. hot water works fine. If your machine has 2 water hoses connected check to see if both water valves are connected and switched on, if so the you may have a faulty cold water ...
...control valve- not closing fully- the hot water one, if the washer is hot and cold fill, and the cold one if it is just cold fill! Sorry but it needs replacing and a service call ;-0( Good luck, John ...
Question about Elite 45986 Front Load Washer
...cold water not using the cold water cycles even though it is chosen for the wash. both the hot and cold water fawcets are on. the washer is ONLY using the hot water. please let me know why that is ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions