Questions & Answers for: cold start injector

cold start valve problem Hello, I have 87 300e , the cold valve injector keeps spraying fuel inside intake, everytime the engine is at normal oparating temp. cousing to flatt the engine resault hard ...

...cold start system check for problems. The COLD START INJECTOR SWITCH might be bad.(The cold start injector switch activates the cold start injector on all V-6 Fieros. This switch turns on the cold ...

...cold start injector that is controled by coolant temp and more than likely the sensor, which is located center of intake, between #2 and 3 injector...it looks a bit like a reg. temp. sensor and will ...

...cold start valve. This means your cold start valve is good. It dies since after that cold start valve will close as it designed that way so fuel from injectors will take over. But apparently fuel is ...

...start cold. earlier id take a lot to shart and after it warms up you could kill it and start it right up.. now it just backfires , almost starts but never will cold Generally the main reasons a car ...

cold start injector" checked for leaks. The cold start injector only operates during cold starts. If you don't notice the problem during warm starts, then the cold start injector is the place to start

...start on cold mornings and days I'm assuming the engine cranks with the starter but does not start and run. check the operation of the cold start injector. This is a separate fuel injector that ...

...cold start injector do 1991 mazda 929s The manner of construction of cold start valve is essentially quite similar, if not absolutely, as that of any other regular fuel injector. The main positive ...

cold start injector 2 in CRV 2007 It does not use a cold start injector, that is old school technology and has not been used since the early 90's. Cold start is done with the fuel injectors based on ...

...cold start fuel injector location Car won't start with out starting fuild. Changed fuel pump and fuel filter. Was told maybe cold start fuel injector is problem.. so I need a location of cold start ...