Questions & Answers for: Jeep Grand Cherokee code engine

Question about 1995 Grand Cherokee

1 Answer

...code 54 on a 1995 Jeep Grand Cherokee My engine light came on, and I went through the process of checking the trouble code which came out to be 54. Can anyone please tell me what code 54 mean on a ...

Ad

Question about 1993 Grand Cherokee

1 Answer

...ENGINE LIGHT should begin to flash a series of codes. The flashes will be separated by short an long pauses. The long pauses separate the "ones" and "tens" positions, and each code from the next. A ...

Ad

Question about 2000 Grand Cherokee

2 Answers

...code meaning engine is running too cool. change your thermostat and will fix problem. if you cant clear code after a few drive cycles the computer will cut light off once it sees problem is corrected ...

Question about 2004 Grand Cherokee

2 Answers

code? Check engine light is on. I brought up this code P0700 P0700 is a code that tells u the TCM [transmission Control Module] has requested that the PCM [Powertrain Control Module] turn on the check

Question about 1993 Grand Cherokee

3 Answers

...engine block. This P0325 code may show up intermittently or the Service Engine light may be lit constantly. Symptoms You may notice drivability problems including a lack of power and perhaps some ...

Question about 2004 Grand Cherokee

1 Answer

engine code po29 DTC P029 isn't a right code; please send us details about year, model and engine sizes. Also could try turn On/Off the key three times and stay in ON position (dont start engine).

...Code 17-Low engine temperature-engine coolant temperature remains below normal operating temperature during vehicle travel; possible thermostat problem. Code 21-Oxygen sensor signal-neither rich or ...

Question about 1999 Grand Cherokee

1 Answer

engine light on with code P0725 When stopping it sometimes dies and now engine light is on with a code P0725 P0725   JEEP Description The Engine Control Module (ECM) monitors the engine speed ...

Question about 1999 Grand Cherokee

1 Answer

engine oil type or weight.Code 153 is for O2 sensor bank 2 sensor one not switching.Code 113 is for the intake air temp sensor saying the intake air is over 200 degrees.I would clear the codes and see

...code stored in engine computer module has to be retrieved. But as why check engine light came up,for that issue there are few help link with solutions to correct the issue.======== Click the link ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...