Next enter code 401, and press start, See of that clears the problem. If it does. Remove the fiser and clean the buildup off the thermistor. If it doesnt you will most likely have to replace the fuser
Next enter code 401, and press start, See of that clears the problem. If it does. Remove the fuser and clean the buildup off the thermistor. If it doesnt you will most likely have to replace the fuser
code pop?? PLESE HELP my company is UNITED COPY SERVICE @ADRES IS [email protected] telefon 281 550 4900 thank you wesley That is something to do with the drum maintenance system. 1 of 2 thinhgs is
...code:(401) Enter diagnostics, wait 30 seconds for the optics to initialize, enter ?401? followed by ?Print?, then shut down the power & wait 10 seconds before switching power back on. That will ...
code after rebooting. Any ideas? Error codes 7-401 to 7-404 are life end for the tray rollers. If no jamming probs then enter diags mode (Back and'i' buttons and switch on) scroll down to NVRAM access
...down "0", press "stop/clear" and wait 30 seconds for optics to finish initializing, then enter "401" then "print", shut off machine, wait 10 seconds and turn back on. code should now be
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions