Questions & Answers for: Chevrolet Astro how to get code

Question about Chevrolet Astro

1 Answer

how do i get the error codes from a 95 astro van without a diagnostic tool place a jumper wire between terminals A and B of the diagnostic connector , located just under the steering column,pointing ...

Ad

Can I down load the codes from my 2001 chevy astro? Can anyone tell me if you can still down load the codes from a 2001 chevy astro w/o the code reader? You used to be able to short out the system and

Ad

Question about 2000 Astro

1 Answer

radio code hi I habe a problem ...may car , a chevy spark, is in indonesia, and i lost the radio code. where can i find out "that code" Viktor Contact your local Chevy dealer with your VIN# lcated at ...

co2 error code in astro van. changed sensor, same problem. Lack of power and speed. Especially up hil or against the wind Did you reset the code after replacing the sensor? That sounds like the ...

trying to find unloc code for Chev Astro Radio using the info that I have, the numbers displayed on the radio are 052 then 053 These numbers are your code to unlock the radio.What you need to do is ...

abs codes for 1995 chevy astro van i have i couple of codes i can not find code 27 and code 65 can u pls help me find them thanks CODE 27 IS AN ERRATIC LEFT FRONT WHEEL SPEED SENSOR CODE AND 65 IS ...

Question about 1999 Astro

1 Answer

1999 Chevy Astro P01870 code P01870 code The P1870 DTC code is trans-axle component slipping. In most cases you can replace the transmission control solenoid and it should solve the issue. These ...

Question about 2004 Astro

1 Answer

I reset the computer on my 2004 Astro Van? The mechanic says it has to be reset to see if the error code comes up again, and then take it to him, but he has no time for me to go to have it reset... Hi

p0300 random/multiple cylinder misfire detected For OBD code problems check the list of help links below. Click the link below to go through its procedure.--------------Diagnostic Code P2195

Question about 1994 Astro

1 Answer

...Check the fuse for the ecm before replacing it. If you have a ford eec diagnostic try to get the codes. If you don't have a eec code reader there is a way to get the codes out by counting

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...