Questions & Answers for: Singer co on a loop

Ad

Question about 8280 Mechanical Sewing Machine

1 Answer

...one day and I can't find it. Do you know where I can get a replacement? THANKS http://www.singerco.com/support/ You will have to get a new Trigger Release Shank Also try: ebay store:Gone Sewing ...

Ad

Question about 2639

1 Answer

...loop around the casing, the needle just goes down and back up with the thread and nothing happens. Please help!! Definitely needs retiming, I can attach instructions if you email me. ...

Ad

Question about 7442 Mechanical Sewing Machine

1 Answer

I can't get the thread and bobbin to make a loop to start my sewing. karbell01@aol.com it sound like the timming is off, if your machine won't make a loop at all it has to be serviced now if it makes ...

Question about 1120 Mechanical Sewing Machine

2 Answers

Thread loops underneath thread loops on bottom--looping thread could be caused by 2 things 1.check the needle see if it's bent or blunt--lay needle on flat surface & roll the needle over---if ...

Question about 1120 Mechanical Sewing Machine

2 Answers

...get looping on the back of your work. Sometimes the needle unthreads itself http://www.sewingonline.co.uk/instructions/singer185k/ you need to adjust your tension, or make sure bobbin is threaded ...

Question about 1120 Mechanical Sewing Machine

1 Answer

I think the bobbin tension is off - I have large thread loops on the underside of the fabric when I sew It sounds crazy but if you have loops on the underside of your fabric it means your upper thread

My needles hits the lower loop on my 16sh644 serger and the thread from my needles won't stay wrapped around the lower loop lever I have changed out both needles, the lower loop after it broke and

39;t loop so bad. Any ideas? try changing the needlethread the machine, use every thread guidethere could also be something wrong with the tension dial, it wouldbe a good idea to have the tension dial

bottom thread is looping on top of fabric on my Singer Futura 400 machine Bobbin thread is looping on top of fabric, even though tension is set at S Thread looping can also be caused by the use of ...

Question about CE250 Computerized Sewing Machine

2 Answers

Singer 328K is jamming. this is a used machine, new to me. seems old but solid. was working well, then bobbin thread started looping. i have played with the tension. still loops. now the hand wheel ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machine Experts

Cindy Wells

Level 3 Expert

6046 Answers

Kelley Buchanan
Kelley Buchanan

Level 2 Expert

130 Answers

tsalagi152

Level 2 Expert

89 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...