Questions & Answers for: kawasaki clutch slipping Motorcycles

3rd gear clutch slip My 2006 zx636 the clutch slips on hard throttle in 3rd gear or higher.I was wondering if i should try a differant oil before i change the clutch. I'm currently using pensol ...

1997 VULCAN CLASSIC WITH NEW CLUTCH SEEMS TO SLIP IN ANY GEAR 1997 VULCAN CLASSIC WITH NEW CLUTCH SEEMS TO SLIP WHEN I CRANK THE THROTTLE IN ANY GEAR. MECHANIC SAYS THE CLUTCH IS DESIGNED TO DO THAT. ...

...clutch is slipping, but has dramatically got I have a ZX9R C1, I noticed a while a go that when giving big handfulls, at low revs on the motorway the clutch would slip. I have been using the bike ...

clutch is slipping i can bleed it and get a little less slipping i dont know what the thing is called i am bleeding but i may need new one i have compressed it in an i can do it without opening any ...

...like you have 2 problems. Check in order #1 then 2 1.Air in the clutch hydraulic system. Check your brake fluid level bleed out any bubbles in the system. 2.Slipping clutch replace the clutch

clutch plate wear limits clutches usually start to slip before the plates wear down to the grooves, so they are not really wear limit grooves. a workshop manual for whatever model you have will list ...

...slipping clutch, but at high speed about 100km + and hour, if i give it some gas it slips then it seems to ease off, I also don't seem to have much free play on my clutch lever before it engages. ...

...clutch works okay for a while then starts slipping You need to reajust the clutch as the new discs are wearing in. As they wear down just a bit, the adjustment needs to be reset as they'll

CLUTCH slips on 2004 vulcan CLUTCH SLIPS WHY?? clutch adjustment or worn clutch plates will cause this , check adjustment ok then if no change replace plates !

...clutch on a 1997 kawasaki bayou 300? The info is here http://www.kawieriders.com/forum/kawasaki-brute-force-prairie-bayou/105399-slipping-clutch-bayou-300-a.html slipping clutch on bayou ...