Tranny clutch problems in Geo Tracker I changed engines in my 1989 tracker. I put a motor from a 1993 sunrider in. Since doing this the clutch slips in the transmission when you accelerate. We have ...
no tension on clutch peddle i just replaced the clutch on a 1996 geo tracker.we put it back in and now we dont have any clutch peddle tension.did the throwout bearing come off its mounts when we put ...
...clutch. It's not slipping but I have to pump the clutch pedal to shift. The fluid was really low so I thought air might be in the lines. You can open the bleed screw and let it gravity feed or ...
...slipping clutch is a bad clutch the acid test is to remove the slave point car in safe direction , start car in gear, does it slip now? yes, then the clutch is bad. you do this test off road safely.. ...
...clutch and as I drove down the road it was slipping in and out of gear starting at third gear. I tried adjusting the nut on the cable in and it got worse so I loosened it and it stopped SLIPPING when ...
Question about 1995 Tracker
...runs great but I can't put it into any gears someone please help the 5speed box. sure, but is the clutch bad or the shift lever. bad. ? so can you start car in gear with clutch depressed.? yes, no.
Question about 1995 Tracker
...backwards 3 feels like 5. weak. right.? I think you mean just that engine power week? and that the clutch dont slip . if clutch does slip ,adjust the cable. if it has one. if engine power lacks ,
Question about 1995 Tracker
1991 Prizm. When I release clutch in first, why doesn't it go? Loka, your clutch is worn out and needs replaced, as there is very little adjustment to make it better. the lower the gear the more a ...
Question about 1995 Tracker
...geo prism lsi manual tranny 1.6 liter will only move a little rpm rev high little torque check the clutch operation if cable it is a faulty clutch cable and needs replacing if hydraulic it will be ...
Question about 1995 Tracker
...slipping or something in every gear. Maybe it's the clutch? I tried to adjust it but made it a little worse. probably needs a new pressure/friction plate . stick shift slips
well step one is to ...
Usually answered in minutes!
421 Questions
350 Questions
286 Questions
276 Questions
239 Questions