Questions & Answers for: clutch pedal return

...clutch pedal down in first gear and car jerks forward. I shut off car to disengage gear and restart car but now gear will not re-engage. Clutch pedal has no pressure, resevoir is full. Is this a ...

Ad

clutch pedal goes to floor and does not return, Is there a problem with the Hydraulic clutch or is there a return spring that I do not see that might be broken? Clutch pedal is very easy to push. hmmm

Ad

Question about 1983 280ZX

1 Answer

...clutch pedal sticking clutch pedal will not return Hi, Look in the foot well (where you normally have you feet) you should see a return spring attached to the clutch pedal, if missing or you can see ...

...clutch pedal won't return Had it worked on and the fluid level is fine, but the pedal goes so easily to the floor, and then when I lift my foot off the pedal, it catches and then pops up. I was ...

Question about 2001 Pathfinder

1 Answer

clutch wont return just did a clutch replacment and now my clutch pedal will not push all the way to the floor it goes half way and stops Does the clutch pedal not return?

Question about 2001 A4

1 Answer

...clutch pedal return An intermittent problem that usually happens when engine warmed up.Sometimes clutch pedal does not return fully after engaging gear. Gear selection is unaffected.Pedal will return ...

Question about 2001 A4

2 Answers

Clutch pedal sticks to the floor on exeleration and only returns when pulled back by hand or foot.have installed new cluch plate,pressure plate and thrust bearing.what could be the problem???? I would

clutch don't have spring to return. hydraulic pressure return the pedal. if you pedal go down to the flour and don't return you lost the pressure. First look in the reservoir for fluid. add DOT3 brake

...clutch pedal return spring located at and where do its attach to???? 2006 volvi? s40 2.4l It shouldn't use a spring to return the pedal, it uses hydraulic pressure to return the pedal to the rest ...

...clutch pedal won't return back UP, why ? indicates no fluid in the system or air in the system in a hydraulic it requires fluid to make the clutch disengage and also fluid to make the pedal return ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...