Questions & Answers for: Dodge Avenger clutch

the car will not go into gear. Can't get car out of park Could be the clutch problems Try to go into gear with engine off, if its still can't you should replace the clutch.

99 dodge avenger gears will not engage I start car with clutch pedal down in first gear and car jerks forward. I shut off car to disengage gear and restart car but now gear will not re-engage. Clutch ...

there is a problem with my clutch system and i was told that my master cyilinder for my clutch had no fluid and i dont know what type of fluid to put in there Clutch and brake master cylinder both ...

Clutch cylinder possibly leaking. Fluid level not changed, but clutch does not disengage when pedal is pressed. No resistance in pedal. assuming the linkage at the clutch is not broken, this symptom ...

I have a 97 Dodge Avenger 2.0 thats clutch was replaced 25,000 miles ago and now I need to adjust the clutch pedal, because it goes to the floor without completely disengaging over half of the time. ...

giving code p0704 P0704- Clutch Switch Input Circuit Malfunction Possible Causes: - Open or short clutch switch circuit - Poor clutch switch circuit connection - Damage clutch switch - Misadjusted ...

car will not start, car runs when the starter is bumped over. how do I check the clutch switch? I want to trace the circuit to the clutch pedal switch the clutch switch is on the pedal ...

Where is the slave cylinder for the clutch located. internal or externaly. i want to replace the clutch on my avenger 2.0l and was wondering where the slave cylinder for the clutch is. First thing to ...

Where is the A/C clutch relay located A/C blows warm air, and the clutch not engaging time for a new compressor

how do i bleed a dodge avenger hydraulic clutch added dot 3 and 4 brake fluid Dodge forums How to bleed the unbleedable clutch assy DodgeForum com Done.