Questions & Answers for: close top

CLOSE TOP COVER TO CONTINUE TOP COVER IS CLOSED BUT RED INDICATOR LIGHT IS STILL FLASHING THEREFORE NOTHING WILL PRINT! 1. The top cover hinges are not connected to the ink slider bar properly. - Open

...close when the retractable top is closed. Once the top is closed I continue the pull the lever and the light will say in operation and I can hear the motor running however the trunk is stuck open. ...

...top continued to close in compartment right side upper forward pad looking thing popped and the compartment would not close, however the top will raise and go back in place, cannot leave top in ...

...close the top but rear windows will not close. Tried using the key in the door but that did not close the rear windows nor did the switch to lower the top. I hear the motor run when pushing the ...

...top won't close or open and if i drive it beeps like i am driving with a partly open top. After a few hours to couple of days it disappears and I can operate the top again but with the above ...

close the top, at certain points it stops working and the cid beeps. I release the controp lever and then push it to operate again. The top continues to move and then stops and sid beeps again. It may

...close but roof doesnt No doubt your soft top issue has long been resolved but just in case someone has a similar issue: I started to open my A4 Soft top externally using the door key method and like ...

CLOSE THE TOP, AS RIGHT NOW IT IS IN CLOSE POSSITION BUT THE LIGHT KEEP ON BLINKING, i DONT KNOW WHAT TO DO ANY MORE COULD ANY BODY HELP ME? Turn on the radio so the battery is engaged, or turn on the

...top won't close. Everytime I try to close the top it sounds like it's going to work but then the trunk releases and the top closing function ceases For the passenger front window, turn vehicle on, ...

...close the top cover" Hi, my Kyocera FS-2000D is giving me a hard time. I can close the top cover over and over again and still get the error "close the top cover" Anyone knows how to fix that? Thank ...